Lift Station Basics | Pumps Service Australia

To remove wastewater efficiently and easily the lifting station is used This machine transfers wastewater from low to high. If doing it manually takes a lot of time and money. The main benefit of using a wastewater lift station is that it saves a lot of money wasted during excavation.

Type of elevator station

There are two main types of wastewater lifting stations commonly used by responsible municipalities. One dry High pressure pump and another submersible pump. There is a big difference between the two.

Dry Well

This is one of the original systems that is still widely used. in stations of this type The system is located in a separate location. mostly underground Due to this physical separation Therefore, the maintenance of this type of pump station is difficult and even dangerous in various cases. and can put you in serious danger

Submersible Pump

As the name suggests, this type of pump station is submerged in areas that need to be used, such as in wastewater, placed in wet wells and motors in them are responsible for pumping wastewater. This pump is considered the most advanced because it reduces safety concerns related to maintenance.

Elevator Station Operation

The whole sewage collection system Lifting stations play an important role. Raw wastewater by taking advantage of gravity flows into the soil through sloping pipes. due to gravity involved Therefore this pipeline is often referred to as gravity pipeline. The lifting station moves the wastewater from high to low.

Sometimes it is necessary to feed wastewater into the pain system from a lower altitude. must be transported at higher altitudes is naturally impossible Fortunately, we have an elevator station.

After that, the raw wastewater is stored in a container called a wet well. This is a container that is an anchor cell and will be emptied when it reaches a certain level. during this period the stored water is tested and inspected carefully to monitor the level of wastewater. Solid materials, such as coarse, are removed at this stage of the process.

When the water tank is wet, it is filled with wastewater. The installation of the lifting station will begin. A dedicated lifting station will lift the sewer pipe upwards using a sewer system. The system consists of a compressor and a sump pump used to raise wastewater from low altitude to higher altitude for further treatment and recirculation.

How to Maintain an Elevator Station?

Fertilizers and wastewater are hazardous substances and handling requires special attention. It is important that elevator station operators are aware of and maintain elevator stations on a regular basis. Not only routine is important for best results. But in some cases it is also a legal requirement that must be met.

There are easy ways to maintain it, such as recording and checking flow readings. motor float grease pump cleaning and testing the power supply used In addition, elevator station testing is required to inform those involved of any operational problems or damage to equipment.